Referral and Testimonial. If you are still about to have your dream house built and this is your first time to hire someone for a plumbing plan, then getting referrals is the best option. In addition to families and friends, one great source of referrals is real estate professionals as they are always in contact with reliable for plumbing plans and repairs.
Be cautious. If you've just become aware of a problem with water line repair in your home, there are a few steps you should take. First, if there's a lot of water (such as from flooding), you should turn off your electricity to avoid electrocution. Also, don't use your regular household appliances (such as a vacuum cleaner) to remove water. If the water is contaminated (such as from a sewage line), you and your family should leave the home so that you don't get sick. Finally, if the water is from a leak, try to locate the leak's source and turn off the water to prevent further damage.
If you need to add copper pipe make sure that you clean the old and new pipe by using sandpaper, inside and out. If it's not clean the solder will not flow into the joint. Another tip is to not over wrap the mail threaded pipe with tape, this can cause a leak. Twice around should be enough. Also, don't over tighten it.
The next step in this process is to determine what type of method is available for fixing the problem. You cannot just caulk a crack or fill it in with cement and hope for the best. Unfortunately, there is more work than this because you have to fix the problem from both the inside out and the outside in. This takes a professional in most cases to determine the best method for repair.
As with anything, when you are not sure how to fix a plumbing issue and when you don't have the proper equipment, you should contact a professional. They can usually find out what the problem is and resolve it for you in a short period of time. They will also be able to tell you if you have any other problems and water line repair they can suggest resolutions.
The way a toilet plunger works is by filling up with water and then pushing that water through the stopped up drain. When unclogging a clogged toilet, the idea is to plunge up and down a couple of times so the plunger fills with water and then jam the open end, sometimes called a force cone, into the waste outlet in the plugged toilet and start plunging. You may have to pump the plunger up and down several times to clear the blockage.
A large plumbing job, such as re-piping or installing additional fixtures, may require a permit. Check with your city's department of building and safety before asking for estimates, and avoid any plumbers who are reluctant to comply with regulations.